Your One Stop Shop Products & Solutions 

View Markets & Applications

Learn More

Products & Solutions

Products & 
Solutions

View Markets &
Applications

Learn More

Save Time & Money when Treating Soils, Sediments, Waste Streams, Oil & Gas Drill Cuttings, Biosolids & More!

  • Accelerate production to keep projects on time & budget
  • Meet landfill strength requirements
  • Work during very cold / rainy seasons
  • Achieve optimum moisture content for construction applications
  • Remove free liquids for proper transport and landfill disposal
  • See for yourself! Check out our drying video to learn more! 
  • Improved geotechnical properties for better strength & compaction 
  • Short & long-term strength gains for extended pavement life 
  • Permanent reduction in shrink-swell potential and soil plasticity 
  • Increased bearing capacity of soil can reduce the layer thickness of base and pavement 
  • Stabilized soils can act a moisture barrier
  • Hydrate lime acts as a mineral filler, stiffening the asphalt binder and hot mix asphalt (HMA) 
  • Reduces stripping to extend pavement life 
  • Improves resistance to fracture growth in low temperatures 
  • Improves moisture stability and durability 
  • Alters oxidation chemistry in the binder to reduce age hardening 
  • Alters clay fines to improve moisture stability and durability
  • 50% – 70% Cost Savings when comparing Chemical Stabilization Vs. Remove & Replace for Construction Applications 
  • Reduced transport costs associated with off-site disposal of contaminated waste streams 
  • Solutions to meet a variety of budget & application specific requirements 
  • See for yourself! Check out our drying video to learn more!

Save Time & Money when Treating Soils, Sediments, Waste Streams, Oil & Gas Drill Cuttings, Biosolids & More!

  • Accelerate production to keep projects on time & budget
  • Meet landfill strength requirements
  • Work during very cold / rainy seasons
  • Achieve optimum moisture content for construction applications
  • Remove free liquids for proper transport and landfill disposal
  • See for yourself! Check out our drying video to learn more! 
  • Improved geotechnical properties for better strength & compaction 
  • Short & long-term strength gains for extended pavement life 
  • Permanent reduction in shrink-swell potential and soil plasticity 
  • Increased bearing capacity of soil can reduce the layer thickness of base and pavement 
  • Stabilized soils can act a moisture barrier
  • Hydrate lime acts as a mineral filler, stiffening the asphalt binder and hot mix asphalt (HMA) 
  • Reduces stripping to extend pavement life 
  • Improves resistance to fracture growth in low temperatures 
  • Improves moisture stability and durability 
  • Alters oxidation chemistry in the binder to reduce age hardening 
  • Alters clay fines to improve moisture stability and durability
  • 50% – 70% Cost Savings when comparing Chemical Stabilization Vs. Remove & Replace for Construction Applications 
  • Reduced transport costs associated with off-site disposal of contaminated waste streams 
  • Solutions to meet a variety of budget & application specific requirements 
  • See for yourself! Check out our drying video to learn more!

Learn more about Mintek’s Cost Effective Solutions for Soils, Sediments, Waste Streams & More!

Learn more about Mintek’s Cost Effective Solutions for Soils, Sediments, Waste Streams & More! 

Quicklime (Calcium Oxide) 

Quicklime provides the fastest drying to keep projects on time and on budget. Quicklime is also highly effective at reducing soil PI to reduce shrink/swell even after freeze-thaw & wet-dry cycles. In environmental applications, quicklime will adjust the pH of the waste stream, rendering heavy metals insoluble. Quicklime is made from high quality, natural deposits of limestone and tested to ensure consistent, high-performance.

  • Highest available CaO for the fastest drying of wet soils, sediments and waste streams
  • Improved soil conditions via PI adjustment to reduce shrink / swell
  • Extended pavement life via short & long-term strength gains
  • pH adjustment for Hazardous & Non-hazardous waste streams rendering heavy metals insoluble
  • DOT Approved per ASTM & AASHTO Requirement, click here to see our full list of DOT approved states

Quicklime Fines

  • Size: Courser than quicklime fines for reduced dusting
  • Delivery: EPA-Tarp compliant dump trailer or supersacks

Quicklime (Calcium Oxide) 

Quicklime provides the fastest drying to keep projects on time and on budget. Quicklime is also highly effective at reducing soil PI to reduce shrink/swell even after freeze-thaw & wet-dry cycles. In environmental applications, quicklime will adjust the pH of the waste stream, rendering heavy metals insoluble. Quicklime is made from high quality, natural deposits of limestone and tested to ensure consistent, high-performance.

  • Highest available CaO for the fastest drying of wet soils, sediments and waste streams
  • Improved soil conditions via PI adjustment to reduce shrink / swell
  • Extended pavement life via short & long-term strength gains
  • pH adjustment for Hazardous & Non-hazardous waste streams rendering heavy metals insoluble
  • DOT Approved per ASTM & AASHTO Requirement, click here to see our full list of DOT approved states


Quicklime Fines

  • Size: Courser than quicklime fines for reduced dusting
  • Delivery: EPA-Tarp compliant dump trailer or supersacks


Quicklime Fines

  • Size: Courser than quicklime fines for reduced dusting
  • Delivery: EPA-Tarp compliant dump trailer or supersacks



Calciment
Mintek is the exclusive supplier of Calciment™ a hybrid of Portland Cement and quicklime. 

  • A unique blend of CaO and pozzolans
  • Pozzolans create the cementitious properties that allow Calciment to stabilize problematic soils, sediments and waste streams
  • Available CaO accelerates the drying / dewatering process, particularly in cold and/or wet climates
  • Modifies soil by adjusting the PI of high clay soils to eliminate shrink / swell after freeze / thaw & wet / dry cycles.
  • Used on thousands of projects across the country
  • An economical alternative to traditional reagents
  • Custom blend options available to meet your specific job site requirements
  • All Calciment products are LEED-certified for pre-consumer products
  • DOT Approved, click here to see our full list of DOT approvals with more to come!



Hydrate Lime

Formed when quicklime is mixed with water, also known as the slaking process, this results in calcium hydroxide, or Ca(OH)2. Hydrate is the least dense of our products and is physically a very fine white powder.


Hydrate can be used to:

  • Stabilize subbase soils in construction applications to strengthen and modify the soil to extend the pavement life
  • As an additive in asphalt for anti-stripping while stiffening the binders in asphalt
  • Improved resistance to rutting and moisture damage
  • Better life cycle cost-benefit ratios than liquid antistrips
  • Greater Tensile Strength Ratios after repeated freeze thaw cycles when compared to untreated and liquid treated asphalts
  • DOT Approved, click here to see our full list of DOT approvals with more to come!



Distributed Products

Mintek offers a variety of distributed products to assist with drying, modifying and stabilizing soils, waste streams and sediments in a variety of markets.

Solutions include:

  • Portland Cement
  • Bed Ash
  • Fly Ash
  • Cement Kiln Dust (CKD)
  • Lime Kiln Dust (LKD)
  • And More

Flexible Delivery Options

Whatever your specific project needs, we can find a delivery option that works for you. With multiple shipping points across the U.S. and an expert logistics team, Mintek can provide the flexibility and dependability your project needs.

Check out the Mintek Advantage section for more info

Let Mintek Help Ensure You Get the Right Solution for the Job

Not sure what product to use, the proper dose rate, or which packaging type is best for your application? Check out our resources page for recommendations based on soil type, check out our dose rate calculator, request a sample or get support from our in-house tech center & technical experts.

  • Recommendations based on soil type
  • Our dose rate calculator
  • Request a sample
  • Request support from our in-house tech center

DOT Approvals

Click here for a comprehensive list of our DOT approvals and check back often as we add new DOTs regularly!

Flexible Delivery Options

Whatever your specific project needs, we can find a delivery option that works for you. With multiple shipping points across the U.S. and an expert logistics team, Mintek can provide the flexibility and dependability your project needs.

Check out the Mintek Advantage section for more info

Let Mintek Help Ensure You Get the Right Solution for the Job

Not sure what product to use, the proper dose rate, or which packaging type is best for your application? Check out our resources page for recommendations based on soil type, check out our dose rate calculator, request a sample or get support from our in-house tech center & technical experts.

  • Recommendations based on soil type
  • Our dose rate calculator
  • Request a sample
  • Request support from our in-house tech center

DOT Approvals

Click here for a comprehensive list of our DOT approvals and check back often as we add new DOTs regularly!

Since 1994 Mintek Resources, Inc. has provided solutions to the Environmental, Construction, Agricultural, Oil & Gas, Waste Water Treatment, Industrial markets & more! Our solutions are economical reagents that assist with drying, modifying, stabilizing, neutralizing, and fixating soils, sediments, waste streams, & Contaminants. We are your one-stop shop for Calciment, quicklime, bed ash, fly ash, cement, hydrate lime, & more!

Links

Products & Solutions ↗Market & Applications ↗The Mintek Advantage ↗Projects ↗Resources ↗For Carriers ↗About Us ↗

3725 Pentagon Blvd. Suite 100
Beavercreek, OH 45431

Fax: 937-431-1305 

Mintek Can Help Save You Time & Money on Your Next Project

Phone: (937) 431-0218

YOUR ONE STOP SHOP PRODUCTS & SOLUTIONS

Learn more about Mintek’s Cost Effective Solutions for Soils, Sediments, Waste Streams & More!

Distributed Products

Mintek offers a variety of distributed products to assist with drying, modifying and stabilizing soils, waste streams and sediments in a variety of markets.

Solutions include:

  • Portland Cement
  • Bed Ash
  • Fly Ash
  • Cement Kiln Dust (CKD)
  • Lime Kiln Dust (LKD)
  • And More

Calciment®

Mintek is the exclusive supplier of Calciment™ a hybrid of Portland Cement and quicklime. 

  • A unique blend of CaO and pozzolans
  • Pozzolans create the cementitious properties that allow Calciment to stabilize problematic soils, sediments and waste streams
  • Available CaO accelerates the drying / dewatering process, particularly in cold and/or wet climates
  • Modifies soil by adjusting the PI of high clay soils to eliminate shrink / swell after freeze / thaw & wet / dry cycles.
  • Used on thousands of projects across the country
  • An economical alternative to traditional reagents
  • Custom blend options available to meet your specific job site requirements
  • All Calciment products are LEED-certified for pre-consumer products
  • DOT Approved, click here to see our full list of DOT approvals with more to come!

Hydrate Lime

Formed when quicklime is mixed with water, also known as the slaking process, this results in calcium hydroxide, or Ca(OH)2. Hydrate is the least dense of our products and is physically a very fine white powder.

Hydrate can be used to:

  • Stabilize subbase soils in construction applications to strengthen and modify the soil to extend the pavement life
  • As an additive in asphalt for anti-stripping while stiffening the binders in asphalt
  • Improved resistance to rutting and moisture damage
  • Better life cycle cost-benefit ratios than liquid antistrips
  • Greater Tensile Strength Ratios after repeated freeze thaw cycles when compared to untreated and liquid treated asphalts
  • DOT Approved, click here to see our full list of DOT approvals with more to come!


MINTEK RESOURCES

REQUEST A QUOTE

About Us

Contact Us